28
connection with this interval. If the periodic connection is zero, it means that the Parani-MSP1000
never initiates connection when there is no data received from SPP.
z
When Bluetooth connection is established: Initiate connection or Do nothing
If the “Initiate connection” is selected, the Parani-MSP1000 attempts to connect to remote host
immediately when Bluetooth connection is established. However, If the “Do nothing” is selected,
the Parani-MSP1000 wait until data is arrived from SPP.
4.3.3. Operation mode – Accept connection from unspecific devices
The Parani-MSP1000 accepts all incoming connections. The configurable parameters are as follows:
z
Port configuration
For more details, please refer to
4.3.2.1 Port configuration
.
4.3.3.1. Port configuration
Please, refer to
4.3.2.1 Port configuration
4.3.3.2. SPP connections
The current SPP connections are displayed.
4.3.4. Operation mode – Initiate/Accept connection to/from specific devices
The Parani-MSP1000 accepts all incoming connections. The configurable parameters are as follows:
z
Port configuration (Click the BD address)
This configuration is different from them of other operation modes. This operation mode requires a
BD address. The direction of the Bluetooth connection should be selected. For example, to
connect the BD address or to accept connection from the BD address. The data logging
functionality is available only in this mode.
Please, refer to
4.3.4.1 Port configuration
.
4.3.4.1. Port configuration
4.3.4.1.1. Operation mode
If the mode is “Accept connection,” the Parani-MSP1000 waits for incoming connection from the
Bluetooth device. If the mode is “Initiate connection,” the Parani-MSP1000 attempts to connect the
Bluetooth device.
Summary of Contents for Parani-MSP1000
Page 3: ...3 Revision History Revision Date Name Description V0 0 1 2007 08 16 Hanjun Yeom Initial Draft...
Page 31: ...31 5 CF card Configuration 5 1 When using a flash memory card...
Page 45: ...45 Appendix 2 Parani MSP1000 Configuration files A 2 1 ip conf...
