Sena Parani-MSP1000, User Manual

Page: 14 / 49

14
From the main menu screen, the users may select a menu item for configuration of the Parani-
MSP1000 parameters by selecting the menu number and pressing the [ENTER] key. In the submenu
screen, users can configure the required parameters guided by online comments.
NOTE: Be sure to perform “save” and “apply” command before you exit from editconf menu
program. All the parameters can be stored into the non-volatile memory space of the box, but the
settings will not be stored until users perform “save” command on the menu. All the configuration
change will be effective after entering “apply” command on the menu.
2.4.2. Configurations using Ethernet connection
The IP address of the Parani-MSP1000 must be known before users can access the box using the
Remote console. The default IP address of the Parani-MSP1000 is 192.168.161.5 . Once users know
the IP address of the box, they can access to it either by using telnet/ssh program or web browser.
The default user name and password is as same as the serial console interface as follows.
root : root
1) Telnet/SSH Access
The steps for accessing telnet/ssh interface is exactly same as the ones in serial console access.
Please take steps from 5) to 8) in chapter 2.4.1 to get into the menu-driven user interface.
2) Web Access
The Parani-MSP1000 supports both HTTP and HTTPS (HTTP over SSL) protocols.