
18
each of these in more detail.
Note: The Parani-MSP1000 will attempt to locate all this information every time it is turned on.
z
IP address
A Static IP address acts as a “static” or permanent identification number. This number is assigned to
a computer to act as its location address on the network. Computers use these IP addresses to
identify and talk to each other on a network. Therefore, it is imperative that the selected IP address be
both unique and valid in a network environment.
Note: 192.168.1.x, 172.16.x.x and 10.x.x.x will never be assigned by and ISP (Internet Service
Provider). IP addresses using this form are considered private. Actual applications of the Parani-
MSp1000 may require access to public network, such as the Internet. If so, a valid public IP address
must be assigned to the user’s computer. A public IP address is usually purchased or leased from a
local ISP.
z
Subnet mask
A subnet represents all the network hosts in one geographic location, such as a building or local area
network (LAN). The Parani-MSP1000 will use the subnet mask setting to verify the origin of all packets.
If the desired TCP/IP host specified in the packet is in the same geographic location (on the local
network segment) as defined by the subnet mask, the Parani-MSP1000 will establish a direct
connection. If the desired TCP/IP host specified in the packet is not identified as belonging on the local
network segment, a connection is established through the given default gateway.
z
Default gateway
A gateway is a network point that acts as a portal to another network. This point is usually the
computer or computers that control traffic within a network or a local ISP (Internet service provider).
The Parani-MSP1000 uses the IP address of the default gateway computer to communicate with hosts
outside the local network environment. Refer to the network administrator for a valid gateway IP
address.
z
Primary and Secondary DNS
The DNS (Domain Name System) server is used to locate and translate the correct IP address for a
requested web site address. A domain name is the web address (i.e.
www.yahoo.com
) and is
usually easier to remember. The DNS server is the host that can translate such text-based domain
names into the numeric IP addresses for a TCP/IP connection.
The IP address of the DNS server must be able to access the host site with the provided domain
name. The Parani-MSP1000 provides the ability to configure the required IP addresses of both the
Primary and Secondary DNS servers addresses. (The secondary DNS server is specified for use
Summary of Contents for Parani-MSP1000
Page 3: ...3 Revision History Revision Date Name Description V0 0 1 2007 08 16 Hanjun Yeom Initial Draft...
Page 31: ...31 5 CF card Configuration 5 1 When using a flash memory card...
Page 45: ...45 Appendix 2 Parani MSP1000 Configuration files A 2 1 ip conf...