37
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
4.5 Serial Hub Mode
In Serial Hub Mode, Parani-MSP relays data communication between Bluetooth devices. With
Parani-SD only 1:1 cable replacement is possible, however, incorporating Parani-MSP multiple
Parani-SDs can communicate each other, 1:N multi-serial with Parani-SD.
In Serial Hub mode, Parani-MSP handles data according to Route Table, which shows which
data frame should go where. Route Table needs to be configured in advance using Parani-MSP
software.
In-Band Command
In addition to Route Table, user can specify the destination of the frame they send by inserting
extra frame called ‘In-Band Command’. Inserted frame will be processed by Parani-MSP and
not be transferred to destination device.
**INI+DST,<dst1>,<dst2>,…**
where, dstX means Bluetooth address of destination.
ex)
**INI+DST,00:0B:53:10:00:8A**
Hello
**INI+DST,00:0B:53:10:00:8B,00:0B:53:10:00:8C**
Bluet
ooth
For example, if you send preceding frame to Parani-SD, 00:0B:53:10:00:8A device will receive
‘Hello’ and the other devices will get ‘Bluetooth’ as below figure.
All Parani-SD should be connected to Parani-MSP.
