39
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Baudrate
1200 ~ 115200 bps
Character size 5,6,7,8 bit
Parity None,
Odd,
Even
Stop bit
1 bit, 2 bits
Flow Control
None, XOn/Off, Hardware (CTS,RTS)
DTR/DSR not
used
RI not
used
Auto probe
not supported
As default, RS232 interface of Parani-MSP is configured for configuration console. In order to
use RS232 interface for the data communication purpose, user needs to change the Console
switch to data mode. Changes will be effective after power-cycling of Parani-MSP. Please restart
Parani-MSP.
AT Commands
AT command is very familiar with the legacy serial application developers. So, AT command
interface of Parani-SD eases a lot of efforts to develop their own application from developers.
So does Parani-MSP. Moreover, AT commands of Parani-MSP are so similar to one of Parani-
SD that developers who have experiences with Parani-SD can make use of multi-serial
functionality in no time.
By default, AT command parser is disabled. You can enable AT command feature on
configuration console as below.
