9
2. Getting Started
This chapter describes how to set up the Parani-ESD for the first time.
-
2.1 Panel Layout
explains the panel layout.
-
2.2 Connecting the Hardware
describes how to connect the Parani-ESD, the power, and the serial
device to the Jig Board.
Following items are pre-required to get started.
- One Jig Board (included in the Starter Kit package).
- One DC power adapter or one USB power cable (included in the Starter Kit package).
- One serial console cable for configuration (included in the Starter Kit package).
- One PC with RS232 serial port.
- Terminal emulation program running on the PC
2.1. Panel Layout
This section describes the panel layout of the Jig Board.
Figure 2-1 The panel layout of Jig Board
2.2. Connecting the Hardware
This section describes how to connect the Parani-ESD to the Jig Board and the Jig Board to the serial
device for initial testing.
- Connect the Parani-ESD to the Jig Board.
- Connect a power source to Jig Board for the Parani-ESD.
- Connect Jig Board for the Parani-ESD to a serial device.
