Sena Parani-BCD110 User Manual Download Page 7 | Manualshive

Page: 7 / 71

background image

7

1. Introduction

1.1. Overview

The Parani-BCDx10 is a Bluetooth OEM SMD/DIP module combining antenna for OEM manufactures
who want to implement Bluetooth functionality with their products cost effectively and also in timely
manner. Parani-BCDx10 have a built in antenna to lower the overall cost while benefit from the Parani-
BCDx10’s field-proven standard SPP firmware provided with no additional cost.

The Parani-BCD210 supports Class2 Bluetooth transmission level for the shorter communication
distance typically ranges from 50m up to 300m. The Parani-BCD110 supports Class1 Bluetooth
transmission level for longer communication distance typically ranges from 200m up to 1000m.

The Parani-BCDx10 is provided with Bluetooth v2.0+EDR compatible firmware runs internally for SPP
(Serial Port Profile) applications by default. The SPP firmware supports up to 4 simultaneous multiple
connections and is designed to work out-of-box for real world SPP applications such as POS (Point-of-
sales), industrial automation, remote metering and other various applications. Optionally, the Parani-
BCDx10 can be supplied with only software stack up to HCI level so entire Bluetooth stack runs on the
host side for the application such as USB dongles for computers or OEM manufacturers can even
develop and embed their own firmware into the Parani-BCDx10.

The Parani-BCDx10 is fully qualified with Bluetooth v2.0+EDR specification so OEM manufacturers
can save cost and time for overall OEM product certifications, which makes the Parani-BCDx10 ideal
solution for larger volume and cost sensitive applications.

1.2. Package Check List

1.2.1. Unit Package

BCDx10SC

- Bluetooth embedded OEM module SMD Type, Class 1 or Class2 w/ chip antenna

BCDx10SU

- Bluetooth embedded OEM module SMD Type, Class 1 or Class2 w/ U.FL connector

BCDx10DC

- Bluetooth embedded OEM module DIP Type, Class 1 or Class2 w/ chip antenna

BCDx10DS

- Bluetooth embedded OEM module DIP Type, Class 1 or Class2 w/ SMA connector

BCDx10DU

- Bluetooth embedded OEM module DIP Type, Class 1 or Class2 w/ U.FL connector

1.2.2. Starter Kit

-

BCDx10DC 1

-

BCDx10DS 1

-

BCDx10DU 1

-

Development board 1

-

DC Power adapter 1

-

RS232 serial cable 1

-

Stub antenna 1

-

3dBi Dipole antenna 1

-

U.FL Cable 1

«
...
5
6
7
8
9
...
»

Summary of Contents for Parani-BCD110








































































Reviews:

No comments

Related manuals for Parani-BCD110

Brand: Ebyte Pages: 34

Brand: YASKAWA Pages: 61

Brand: Hach Pages: 36

Brand: Hach Pages: 72

Brand: National Instruments Pages: 2

Brand: Vacon Pages: 6

Brand: Vacon Pages: 24

Brand: Vacon Pages: 30

Brand: Vacon Pages: 81

Brand: Vacon Pages: 100

Brand: Valcom Pages: 6

Brand: Savant Pages: 2

Brand: SOMFY Pages: 112

Brand: Bettis Pages: 18

Brand: EisSound Pages: 10

Brand: Harman Pages: 20

Brand: Hard Head Pages: 10

WisBlock RAK19012

Brand: RAK Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands