ADVANCED COMMUNICATIONS & SENSING
Rev 0.9 – September 2010
17
www.semtech.com
User’s Guide
SX8634/35/44/45 Evaluation Kit
-
Figure 14: GPIO tab modified (i)
Change the Dec time (default 2ms) and OFF delay (default 1.0s) to OFF.
Each modification on this tab is immediately written to the EVK.
After this is done the LED will turn off directly after a release.
Figure 15: GPIO tab modified (ii)
Change the OFF intensity (default 0) to 64. The LED D0 will be enabled at very low brightness in the OFF state.
