ADVANCED COMMUNICATIONS & SENSING
Rev 0.9 – September 2010
18
www.semtech.com
User’s Guide
SX8634/35/44/45 Evaluation Kit
4.4 LED mapping on GPO pins
LED D0 on the EVK is mapped to button BT0.
It is easy to map LED D0 to another button and e.g. swap with button1
Figure 16: Mapping tab modified
In the example above LED D0 is mapped to Button 1 (default is button 0) and LED D1 is mapped to button 0 (default
is button 1).
4.5 Sensors for buttons, slider or wheel
The SX8634/44 and SX8635/45 start up with six buttons and six sensors in the slider or wheel.
This can be easily changed in the Cap Sensor tab.
The configuration below shows a example which uses a slider with 5 sensors (6 per default), the buttons 0, 2, and 4
were turned off to save power consumption and button 6 was enabled.
