Power supply
Smart Color Watch
10
6. POWER SUPPLY
Fully charge the smartwatch before using it for the
first time.
6.1
CHARGING THE SMARTWATCH
1. Insert the USB plug of the clip into a USB con-
nection of an appropriate device.
2. Open the clip with the charging function and
place the watch into it such that the charging
contacts are in contact with the charging pins.
The watch will vibrate briefly, and a battery
symbol will appear in the display for a few sec-
onds and indicate the charging status. Press
the multifunction button to see the battery
symbol again.
3. When the watch is charged, the battery symbol
is completely filled and no longer flashes. Press
the multifunction button to see the battery
symbol again. Then remove the watch from the
clip.
6.2
CHECKING CHARGING STATUS
•
You can check the charging status in the dis-
play at any time. In the top right corner of the
display, a battery symbol displaying the charg-
ing status can be seen.
•
Approx. 20 minutes before the battery is com-
pletely empty, the watch will vibrate and a
large battery symbol will appear in the display.
The watch should be charged.
•
Approx. 10 minutes before the battery is com-
pletely empty, the watch will vibrate and a
large battery symbol will appear in the display.
The watch should be charged urgently. A few
minutes after this is displayed, the watch will
switch itself off.
_SW294_Smartwatch_online.book Seite 10 Donnerstag, 17. Oktober 2019 3:17 15
