Chapter 6 Operation
[Procedures]
Step [1] Place the object on the center position of the sealing head.
If the object is light, it needs to be held while it is strapped. Please do not hold the place where
the strap is being put.
Step [2]
Depress the start button. the strap will be put automatically on the object.
Do not operate the machine if the heater can not reach temperature for welding
(About 1 Minute long for heater temperature rising)
Caution
: The strap may hurt your hands if you do not wear gloves.
Step [3]
the jammed strap is caught at pre-feed roller, pull out the strap and cut it, then set the strap as
the chapter 5-3.
Step [4]
the buzzer will make a sound while the strap is empty from the reel coil
Chapter 7 Stop Operation
If it is necessary to stop the strapping during operation, press the power switch to off, the machine stops. To
restore the operation, do the following procedures.
[Restoration procedure]
Step [1] Grab the strap with the hand and pull it.
Step [2] Keeping this state, press the start button. The strap grabbed with the hand is discharged out of
the strapping and a new strap is set to the arch automatically
Step [3] Follow the procedures in chapter 6.
Chapter 8 Shutting Down
To shut down the machine, following the procedures are as below:
[Procedures]
Step [1]
Press the power switch on “OFF”
Step [2]
Disconnect the plug to the outlet.
Step [3]
Wind back the strap from pool to the strap coil as follows.
(1) Pull up the brake lever with the left hand, then turn the
reel plate with the right hand in the direction of winding
the strap.
(2) When the reel plate being to turn heavy, stop winding back.
Caution
: If too much strap is remained in the pool, trouble may occur when resuming strapping activity.
Step [4] Cleaning
Cleaning is very important to prevent the machine from trouble and enjoy longer life.
Remove strap leftover, cut dust ect. stick to especially the sealer ect.
The details, contact us or your dealer.
Remarks
: This machine is a non oiling type, you don’t have to make daily oiling.
-
- 16 -
+7(977) 478-08-97
Мазур
Руслан
+7(926) 571-19-50
Мазур
Руслан
Заказ
Оборудования
и
запчастей
