5-3 Thread of strap
[Procedures]
Step[1]
Place the reel onto the rail and push the reel, until
the reel shaft falls into the reel slot.
Caution
: When putting the reel onto the rail, set it in
such a way that the strap end comes out up the reel.
Step [2]
Please install the P.P. strap through the brake
roller(1) then refer to the draft for installing the p.p. strap
through the free roller(2-1) and (2-2),then press the
lever(4) and insert the strap into the entrance (3) till it
reaches the pool unit.
Caution
: If the strap end is split or bend, strap may
catch and block the machine side. At this time you
should cut the strap end, and then try to thread the
strap again.
Step [3]
Draw the end of pp strap in pool cabinet (refer to
FIG.10) and insert it into strap guide (5) through out
the roller(6) and (7) about 15mm.
Step [4]
Close the door and press the power button to make
the machine be ON.
Step [5]
Press the feed strap button and the strap is sent to
the arch fully.
[NOTE]
If the strap is not set to the arch properly, the strap is discharged out of the strapping automatically
Check the strap end, if the strap end is split or bent, cut it and reuse the procedures for threading
the strap into the entrance..
- 15 -
+7(977) 478-08-97
Мазур
Руслан
+7(926) 571-19-50
Мазур
Руслан
Заказ
Оборудования
и
запчастей
