Page | 5
Safety Instructions
Plug toaster into a properly grounded electrical outlet of the correct voltage,
size, and plug configuration. If the plug and receptacle do not match, contact a
qualified electrician to determine the proper voltage and size, and install the
proper electrical outlet.
To avoid any injury, turn the power switch off, unplug the unit from the power
source and allow to cool before performing any maintenance.
For safe and proper operation, the unit must be located at a reasonable
distance form combustible walls and materials. If safe distances are not
maintained, discoloration or combustion could occur. Do not locate toaster
under shelving or closer than 12" (31 cm) from the ceiling.
Allow a minimum of 1” (3cm) clearance along the sides. Allow a clearance of
12" (31cm) along front and rear discharge to ensure proper operation & safety.
To prevent any injury or damage do not pull unit by power cord.
To prevent any injury, discontinue use if power cord is frayed or worn.
Locate the unit at the proper counter height, in an area that is convenient for
use. The location should be level to prevent the unit or its contents from
accidentally falling, and strong enough to support the weight of the unit.
Do not place anything on top of the toaster; doing so could damage toaster or
subject personnel to possible injury.
The toasting of coated or buttered products such as garlic bread, cheese
sandwiches and sweet rolls is NOT recommended. Residue will reduce toaster
performance and could possibly ignite inside the toaster.
When setting up the unit for operation, make sure power to the unit is off and
the toaster is at room temperature. Failure to do so could result in injury.
To avoid damage to the unit or injury to personnel always operate toaster with
crumb tray installed, and do not remove for cleaning until toaster is cool.
Unit is not weatherproof. For safe operation locate unit indoors where ambient
air temperature is a minimum of 70°F(21 °C) & a maximum of 85°F(29°C).
Do not locate the toaster in an area subject to excessive temperature or grease
from grills, fryers, etc. Excessive temperature could cause damage to the unit.
Do not place toaster in an area that restricts air flow around the front or rear of
the unit. Do not place toaster in direct discharge path of air conditioning vent
or makeup air vent.
Use only non-abrasive cleaners. Abrasive cleaners may scratch the finish of your
toaster marring its appearance and making it susceptible to oil accumulation.
