background image

  Page | 12 

  

 

Service & Maintenance 

 

For Service and Repair, contact Semak for your nearest Authorised Service Agent 

The Foodservice Industry is deemed a hostile environment within the scope of 
AS/NZS 3760:2003. Semak Commercial Conveyor Toasters MUST be routinely 
electrically tested for compliance with this standard if used commercially. 

It is recommended that a Food Safety program such as HACCP be employed and that 
routine service and repair be undertaken at the time of electrical testing to ensure 
the correct operation and function of all parts.  

 

Electrical Compliance 

 

Semak Commercial Conveyor Toasters comply with the following electrical standards 

 

 

IEC 60335-2-14:1997 Electrical Safety 

 

 

CISPR14-1:2000 Electromagnetic Compatibility 

 

 

Warranty 

 

The Semak Commercial Conveyor Toaster is a Commercial appliance. This product is 
guaranteed for 1 Year from the date of purchase against mechanical and electrical 
defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty 
are invalidated. If the product has been opened or tampered with (ie. In an attempt 
to repair it) the warranty is invalidated. All warranty repairs should be undertaken by 
Semak Australia.   

 

It is against company policy to authorize warranty repairs over the phone. Service 
Agents will require a work order number from Semak to conduct warranty repairs. 

 

 

Summary of Contents for CT450















Reviews: