Page | 10
Operating Instructions
For Model Equipped with rocker switch
1)
Plug toaster into a properly grounded electrical outlet of the correct voltage,
size and plug configuration. (See the Rating Label)
2)
Place the On/Off switch in the On position.
3)
Turn the Colour Control to the lightest position while the unit heats up. (Note:
Allow approximately 15 to 21 minutes for a warm-up period.)
4)
After warm-up period, set the Colour Control to the medium position and toast
two slices of bread product then re-adjust the Colour Control to the desired
setting. Note: To toast moist products such as English Muffins, rye bread or
whole wheat, slow the conveyor by turning the Colour Control knob to a darker
setting (clockwise).
For Model Equipped with rotary selector
1)
Plug toaster into a properly grounded electrical outlet of the correct voltage,
size and plug configuration. (See the Rating Label)
2)
Rotate the Rotary switch in the high-heat position.
3)
Turn the Colour Control to the lightest position while the unit heats up.
(Note: Allow approximately 15 to 20 minutes for a warm-up period.)
4)
After warm-up period, set Colour Control to the medium position and toast two
slices of bread product then re-adjust the Colour Control to the desired setting.
Note: To toast moist products such as English Muffins, rye bread or whole
wheat, slow the conveyor by turning the Colour Control knob to a darker
setting (clockwise).
5)
This unit can be used for one sided toasting, such at buns and English Muffins
by rotating the rotary switch to the top side heat only (buns).
Power Save Mode
Selected this toaster can go into a Power Save Mode by turning the rotary selector
into Power Save Mode. The toaster is operating at 25% power.
(Note: To place toaster back into full operation turn the selector back in to TOAST.
Unit is back up to full power within 5 minutes.)
