Model SSD1-HS
508.366.1488 | semshred.com Page 15
of 23
7.4
Knife Removal and Sharpening
Blade changes should be done as needed and is recommended based on usage as knife wear
varies depending on the material being destroyed. In all cases, knives should be changed and
sharpened at a minimum of 25 hours of usage to avoid excess dust and potential jams. SEM
highly recommends that this work be completed by SEM trained technicians. Damage to
equipment and harm to personnel may occur if work is not performed correctly.
Rear
deflector
Idle plate
Drive
plate
Front
deflector
Rotor
Adjustment screws
Figure 1 – Chamber Overview
Front deflector
Front bed knife
clamp
Bed knife
Rear deflector
Rear bed knife clamp
Bed knife
Drive Plate
Figure 2 – Exploded Chamber
Grease Fitting