SEM Paper Shredders Operator Manual
6
SEM | www.semshred.com
System Lubrication
For systems that include an auto oiler, follow the instructions located in the section
Setup.
The operator can determine when the oil reservoir is empty in two ways:
1. If the oil jug is visually out of oil, it is time to change the oil. It is recommended
that the operator regularly check the oil level in the jug to see how close it is to
being empty.
2. When the unit stops receiving oil, the system will alert the operator with a
flashing red light (A) that will illuminate on the operator control panel.
Manually Oiling
For systems that do not include an auto oiler, the operator should manually oil the
cutting head. To perform this task, squirt shredder lubricant onto a piece of paper as
demonstrated in the picture below. Cover the oiled sheet with a second sheet of paper,
in effect creating an oil sandwich, and simply feed the paper into the system. The oil
from the sheets will then be dispersed onto the cutting head. Another option is to
purchase SEM lubrication sheets. (See section
Accessories.
)
A.
Summary of Contents for 2226 Series
Page 2: ......
