SEM 2226 Series, Operation And Maintenance Manual

Page: 5 / 16

SEM Paper Shredders Operator Manual
SEM | www.semshred.com 1
Safety
• Read manual and adhere to all warnings and instructions.
• Do not attempt to adjust or modify this machine. This may void warranty or cause
the unit to deviate from factory specifications.
• Do not expose the unit to wet environments or those with gas in the air.
• Use unit only for its intended purpose.
• Only use the cord provided with the unit in an appropriate receptacle. Avoid
damaging the cord.
• Disconnect the unit from power (remove the cord from the wall and the unit) before
doing any maintenance, clean up, or if opening the cover of the unit for any reason.
• Allow new operators a 10-15 minute supervised break-in period.
• Avoid hanging long dangling objects such as hair, necklaces, or ties near the unit.
Overview and Intended Use
SEM paper shredders are designed for the destruction of paper. While all high security
(P-7) paper shredders ONLY accept paper, other models accept paper clips, staples,
and even optical media and plastic credit or ID cards. Please see the table below.
NOTE:
It is very important to oil frequently when shredding optical media in any of the
strip cut and/or 4 x 40mm cross-cut systems.
SEM paper shredders can be ordered at 230V 10A or 120V 15A and both voltages
should be plugged into a dedicated line.
Model Accepted Media
2226S, 2226P, 2226PSP
Paper, Optical Media, Plastic Cards, Paper Clips, Staples
3130P. 3130PSP
Paper, Optical Media, Plastic Cards, Paper Clips, Staples
3140S, 3140P, 3140PSP
Paper, Optical Media, Plastic Cards, Paper Clips, Staples
266P, 266PSP
Paper, Optical Media, Plastic Cards, Paper Clips, Staples
5141S, 5141P, 5141PSP
Paper, Optical Media, Plastic Cards, Paper Clips, Staples
All High Security P-7 Shredders
2226C/3WO, 244/4, 344, 266/4,
5140C/4
Paper ONLY