Selve SE Plus-R, Adjustment Instructions Manual

Page: 38 / 84

38
GB Functions in service mode
8.2. Reprogramming if a transmitter is damaged or lost
Only use if a programmed transmitter is no longer available (damaged or lost)!
In order to program a new transmitter/channel, the receiver has to be put into repro-
gramming mode by disconnecting it from the mains supply. Subsequently press the
PROG button of the new transmitter for 3 sec. All the old transmitters/channels have
been depro grammed.
8.3. Resetting to the delivery status
In the state of delivery, no end positions and no transmitters are taught in the drive!
To return the drive to the state at delivery, the drive must be brought into service mode
by disconnecting it. Then press the
PROG button of an assigned transmitter for
9 seconds.
3 sec. 3 sec. 3 sec.
Fuse/Hirschmann plug
➡
assigned transmitter
9 sec.
3 sec. 3 sec. 3 sec.
Fuse/Hirschmann plug
➡
new transmitter
3 sec.