Selve SE Plus-R, Adjustment Instructions Manual

Page: 35 / 84

35
GB Teaching in/deleting of other transmitters/channels
5. Teaching in/deleting of other transmitters/channels
5.1. Programming further transmitters/channels
Press the PROG button of a programmed transmitter/channel for 3 seconds (wait
for confirmation run from the drive). The receiver is now in programme mode for
1 minute. Press (1 sec.) the
PROG button of the new transmitter/channel. The new
transmitter/channel has now been programmed.
5.2. Deleting of transmitters/channels
Press the PROG button of a programmed transmitter/channel for 3 seconds (wait
for confirmation run from the drive). The receiver is now in programme mode for
1 minute. Press (1 sec.) the
PROG button of the transmitter/channel you wish to delete.
The transmitter/channel has now been deleted.
6. Set intermediate position
The intermediate position is an arbitrary position of the roller shutter between the upper
and lower end.
Set intermediate position 1
➡
✓
programmed transmitter/channel
3 sec.
new transmitter/channel
1 sec.
➡
✓
programmed transmitter/channel
3 sec.
transmitter/channel to be deleted
1 sec.
✓
➧ ➧
>3 sec.
Press and
hold down Run to position Release STOP to save the
position