Selva Sea Bass 4, Owner'S Manual

Page: 11 / 36

10
CONTROL FUNCTIONS
Gear-shift lever .
Starting out from the position of neutral gear ( N ), turn the
lever in boat direction (F) and you engage the clutch with the
forward gear. Turning it in the opposite direction, you engage
the reverse gear (R).
Fig. 17.
Push-button to stop the motor.
Pressing the stop button (red) the ignition circuit is broken and
the engine stops immediately.
Fig. 18.
Choke knob.
Pulling out this knob provides a richer mixture which is
required to start a cold engine.
Fig. 19.
Fuel cock. (Integrated tank)
Ruotando il rubinetto si apre o si chiude il passaggio della benzina
verso il carburatore.
Fig. 20.
Fuel joint. (Separated tank)
Turning the cock you open or close the fuel connection to the
carburator.
Fig. 21.
Recoil starter handle. (Model with manual start)
Pulling this handle starts the engine.
Fig. 22.
Emergency engine stop switch.
Switch to stop the engine in an emergency.
Fig. 23.
Throttle-control adjustment.
A device that allows the throttle to be fixed to give a constant
speed.
Fig. 24.
Accelerator-grip/steering-handle.
Turn the grip to operate the accelerator, and move it sideways to adjust
the steering angle.
Fig. 25.
Cowling lock lever.
Cowling locking device. To remove the top cowling pull the
lever upwards. When replacing the cowl, ensure that it is
correctly fitted over the tray and that the front hook is inserted
correctly, locate the rear locking lever over the cowl’s hook and
push down to lock in place.
Fig. 26.
Free-lock lever to control the tilting arrangement.
This lever controls/locks the engine’s tilting hook assembly to
prevent the engine tilting when in reverse gear due to the
propeller thrust.
Fig. 27.
Clamp-screws.
Use them to clamp the outboard motor on the transom.
Fig. 28.
Steering adjustment grip.
With it you can adjust the resistance to steering movement.
Screw it to increase resistance.
Fig. 29.
Shallow water lever.