SELMI SPIDER, User And Service Manual

Page: 25 / 57

TUNNEL SPIDER
21
4. Installation section
4.1. Positioning
Warning
Before positioning the machine check that the
machine, the associated accessories and the
parts supplied separately have not been
damaged during transportation.
It is the task of the Client to make sure that the
strength of the supporting surface, at the point of
installation, is adequate for the weight of the
machine.
The flooring at the point of installation must be
sufficiently level.
Isolate the machine from any potential vibrations
coming from other nearby machinery.
In the case where the machine or any of the
associated accessories are found damaged it is
important to alert the manufacturer of the found
anomaly so as to agree on the actions to be taken.
Attention
The machine must be placed on a level
surface;
for the other environmental
requirements necessary for optimal
functioning of the machine please see
sections 1.11 and
2.5..
4.2. Electrical connections
Attention
The connection to the mains must be carried
out by specialized staff who must respect the
aspects of the law dedicated to safety and
prevention of injury in the workplace. Use the
necessary personal protection equipment
while connecting the machine to
the mains
The connection to mains electricity must be carried
out following the safety norms in force in the country
in which the machine is to be used.
Before connecting the machine to a voltage supply
make sure that the voltage supply values match
values shown on the apposite plaque.
SCHEMA ELETTRICO N°
POTENZA INSTALLATA kW
TENSIONE V
FASI N°
FREQUENZA
Hz
CORRENTE PIENO CARICO A
CORRENTE CARICO MAGGIORE A
POTERE INTERRUZIONE kA
PROTEZIONE IP