SELMI SPIDER, User And Service Manual

Page: 23 / 57

TUNNEL SPIDER
19
3. Moving and transportation section
3.1. General norms
Before moving the machine always check the weight
and general instructions shown on the packaging.
Personnel not responsible for the movement of the
machine must not remain in the area needed for
movement.
3.2. Packaging
The machine is delivered on a platform, secured by
means of straps and placed inside a cardboard
packaging which is also secured to the platform by
means of straps. An example of the machine
packaging is shown in the picture below.
Instructions for transportation are on the sides of the
packaging
The first symbol shows the correct upright position of
the packaging;
the second symbol shows that the packaging must be
protected from the rain;
the third symbol shows that the content of the
packaging is fragile and must be handled with care.
On two sides of the packaging there is a device called
“TILTWATCH”, which can determine if the packaging
has been tilted to such an extent that the content may
have been damaged; it is necessary to pay attention to
the instructions given on the adhesive label. If the
machine
has been excessively tilted during
transportation (the dot at the centre of the TILTWATCH
device will be red) some components could have been
damaged.
Attention
The manufacturer’s warranty does not cover
damage during transportation; the buyer should
follow the instructions on the adhesive label in
order to avoid disputes.