SELMI Demoulding, User And Service Manual

Page: 30 / 54

DEMOULDING
26
6.3. Cleaning external parts
Attention
The product in the tank and in the machine
must NEVER come into contact with water or
other liquids: this may lead to the formation of
moulds and bacterial loads.
Attention
Use appropriate personal safety equipment
while carrying out the cleaning of the machine.
Clean persistent stains with dry and soft clothes that
do not fray or use flexible bristle brushes.
If the stains are incrusted and hard to remove with
dry clothes or brushes use a liquid solvent
appropriate for use in an alimentary environment.
Avoid the use of flammable or toxic solvents.
Clean the signalling plaques with a cloth, soap and
water or any other mild liquid; avoid using chemical
solvents.
Before beginning and at the end of every
maintenance operation it will be necessary to
vacuum away the dust and other residues, recurring
to using appropriate solvents if necessary but
avoiding the use of compressed air jets which can
create zones of dirt accumulation and may cause
injury to the individuals present in the area.
Warning
The operation explained in this paragraph is
delicate and requires particular attention; the
manufacturer can supply the instructions
necessary to correctly perform the operation.