SELMI Demoulding, User And Service Manual

Page: 21 / 54

DEMOULDING
17
Risk to life (electrolocution)
Before commencing work on any electrical
appliance it is necessary to disconnect the machine
from the mains. If it were to become necessary to
work within the electric panel by bypassing the
electricity cut off devices, then the work must be
carried out exclusively by specialised personnel.
Risk of spreading fire
In case of fire never use jets of water in the vicinity of
the apparatus. Disconnect all connections to the
mains and use the appropriate CO2 extinguishers
located in the building.
2.8. Applied Directives
The following directives apply to the machine
described in this manual:

2006/42/EC machinery Directive

2014/30/UE Directive for electromagnetic
compatibility

2014/35/UE low voltage Directive
And the regulation:

1935/2004 EC regulation for materials in contact
with foodstuffs
2.9. Harmonized technical norms
The machine was designed and tested to conform to
the “essential requirements to health and safety”
present in attachment I of European Directive
2006/42/EC.
The norms used as reference for the design, the
realization and the testing of the machine are listed
in the technical file archived by the manufacturer.
3.
Moving and transportation section
3.1. General norms
Before moving the machine always check the weight
and general instructions shown on the packaging.
Personnel not responsible for the movement of the
machine must not remain in the area needed for
movement.
3.2. Packaging
The machine is delivered on a platform, secured by
means of straps and placed inside a cardboard
packaging which is also secured to the platform by
means of straps. An example of the machine
packaging is shown in the picture below.
Instructions for transportation are on the sides of the
packaging.
The first symbol shows the correct upright position of
the packaging;
the second symbol shows that the packaging must
be protected from the rain.