2
Service Manual
www.selema.it
DC 4Q A Series
All the informations and concepts included in this user guide are copyright, and are supplied to the
user with the understanding that it may not be copied, disclosed or duplicated in whole or in part for
any purpose not authorised by the factory. All specifications are subject to change without prior
notification.
WARNING - Risk of damage and/or personal injury
This drives doesn’t contain any user serviceable part. Attempting to replace any internal component,
may result in damage to the unit and/or personal injury. This may also avoid the warranty.
89/336/EEC Electromagnetic
EN 55011 Compatibility
EN 550082-1
98/37/EC Safety of Machinery
EN 60204-1
CONDITIONS OF ACCEPTABILITY
The devices shall be installed in compliance with the enclosure, moun ting, spacing, and segregation
requirements of the ultimate application.
These devices are intended as open type equipment. The need to repeat a temperature test shal be
considered in final end use application
These devices are suitable for field wiring
The EC mark that is applied to the drives references to the Low Voltage Directive (2006/95/EC)
and EC Directive on EMC (89/336/EC).
The standard EN 61800-5-1 is applied to ensure conformance with the Low Voltage Directive.
The standard EN 61800-3 is applied to ensure conformance with the EMC Directive.
In reference to noise immunity and noise emission the converters fulfi l the requirement to the category
second environment (industrial environment).
If the installation of the drive is carried out differently than described in this manual, the user must
carry out new measures to satisfy the requisites of law.
CE COMPLIANCE:
Agency approvals
Print in Italy rev. 03/2011
