11
Clean And Descale The Water Tank
1. Mix a small bag of citric acid ( about 10 grams ) with the purified water ( about 200ml ) into
the water tank.
8
The incrustation scale should be removed every week to ensure 100% working efficiency.
It can help to reduce the accumulation of incrustation scale, if adding the purified water or
filtering water.
Getting rid of the food particles and the incrustation scale in the water tank, please do
the following instruction :
Notes : Use a mixture of 150ml boiled water and 50ml vinegar ( 8% concentration of acetic
acid ) to get rid of the incrustation scale from the water tank.
2. Start the "Steam" function, then the indicator gets bright. Then it starts to steam.
3. After steaming for 5-6 minutes and then switch off.
4. Empty the used acetic acid ( or vinegar ) solution from the water tank.
5. Wash the water tank and stirring cup thoroughly with water.
6. Before using the appliance, please add 100ml-200ml water into the water tank and start to
steam with empty cup for 10 minutes to get rid of some remaining odor.
7. Keep the tank as dry as possible to prevent bacterial growth.
Fault Analysis And Diagnosis
9
The chapter summarizes the problems we most probably face. If the problems can not be
solved under the following information, please contact the customer service center nearby.
Initial Failure
Fault
Cause Analysis
Eliminative Methods
No steam.
The blade
can not stir.
①
Is there water in the tank ?
②
Is the stirring cup put on
the cup seat and rotated
counterclockwise in the
proper position ?
Is the stirring cup put on
the cup seat and rotated
counterclockwise in the
proper position ?
Please add water to the tank .
Wait for 1-2 minutes, then start the steaming function.
The logo " " of stirring cup lid should be aligned
to the logo " "of handle.
When the stirring cup is put on the cup seat, the
logo " " of stirring cup should be aligned to the
“close ” logo on the cup seat.
①
②
③
④
①
②
The logo " " of stirring cup lid should be aligned
to the logo " "of handle.
When the stirring cup is put on the cup seat, the
logo " " of stirring cup should be aligned to the
“close ” logo on the cup seat.
