8
CLEANING AND CARE
The Shade fabric is easy to care for. Regular dusting with a feather duster or vacuum cleaner brush is recommended. Most
stains can be blotted with a damp sponge and mild detergent. Before using anything stronger than mild detergent and
lukewarm water, test an unobtrusive corner of the shade. If you have any questions, call your dealer for advice.
TROUBLE SHOOTING
PROBLEM
SOLUTION
The motor does not work or runs slowly
Recharge battery.
The shade moves the opposite direction of the control
buttons.
Press and hold the SETTING button, then press and hold
the STOP button. Hold both until the motor jogs (approx.
10 seconds).
SHADE REMOVAL
If you need to remove your shade, follow the instructions below.
Partially lower the shade and insert a flat head screwdriver as shown.
Twist the screwdriver until the head rail disengages from the bracket.
As you release the brackets, support the head rail to keep it from falling.
For no-head rail simple reverse the installation process.
CHARGING THE MOTOR BATTERY
When the shade begins to operate slower than normal, or only beeps when
you attempt to operate, it is time to charge the battery.
Plug the 8.4v charger into the port on the wand.
Plug the charger into an electrical outlet.
A red light on the charger indicates that the battery is charging.
To fully charge the batteries, allow the batteries to charge for at least 1 hour
after the light on the charger turns green.
A typical charge cycle can take between 4-6 hours.
Charging
Port
