background image

AMERICAS

10911 Petal Street

Dallas, TX 75235

Tel: +1 214-647-7880

Fax: +1 214-647-8039

ASIA

Unit C, 14/F, Roxy Industry Centre

41-49 Kwai Cheong Road

Kwai Chung, Kwai Tsing

Hong Kong

Tel: +852 2796 9786

Fax: +852 2798 6546

Room 1201, Freetown Tower D

E 3rd Ring Rd S, 58

Chaoyang Qu

Beijing Shi, China

Tel: +8610-58674776

Fax: +8610-58674775

B-1-27, Dataran Cascades, No. 13A

Jalan PJU 5/1

Kota Damansara PJU 5

47810 Petaling Jaya

Selangor, Malaysia

Tel: +60 3-7611 7302

Fax: +60 3-7629 4192

EUROPE

Rondweg Zuid 85

Winterswijk 7102 JD 

Netherlands

Tel: +31 543-542516

Fax: +31 543-542513

24 Sovereign Park

Coronation Road

Park Royal, London

NW10 7QP

United Kingdom

Tel: +44 020 8965 3209

OCEANIA

14H Vega Place

Rosedale

Auckland 0632

New Zealand

Tel: +64 9-481-0100

PLFRESNEL 1 LED   Quick Start Guide

Document no.:  

 

02-9701-0002

Version date:  

May 30 2019 

© 2019 Signify Holding. All rights reserved.

All trademarks are owned by Signify Holding or their respective owners. The information pro-
vided herein is subject to change, without notice. Signify does not give any representation or 
warranty as to the accuracy or completeness of the  information included herein and shall not 
be liable for any action in reliance thereon. The information presented in this  document is not 
intended as any commercial off er and does not form part of any quotation or contract, unless 
otherwise agreed by Signify. Data subject to change. 

Summary of Contents for PLFRESNEL 1 MKII

















Reviews: