Selecon 5.5-13 Operation Manual Download Page 11

Pacific Operation Manual 

 

11 

 

 

 

 

 

 

Version 4 October 2010 

 

 

Safety  

Philips  Selecon  has  manufactured  this  luminaire  in  accordance  with  recognised  best  practices  to 
recommended international safety standards.  It is your responsibility to maintain this luminaire in good & safe 
working condition.   

Repairs should  only  be carried  out  by suitably  qualified persons.  Do not operate the  luminaire  with cracked 
lens,  damaged  cable,  etc.    Consult  your  Philips  Selecon  distributor  for  assistance.    Only  replace  damaged 
parts with authorised Philips Selecon spares. 

N.B.

    Luminaire  Cable  -  Your  Philips  Selecon  luminaire  is  fitted  with  special  heat  resistant  flexible  cable, 

replace  with  genuine  Philips  Selecon  spare  part  cable  kit  only  -  refer  to  your  Philips  Selecon  distributor.  
(Replacement cables are supplied complete with necessary terminal connectors.) 

Cable Conductor colour codes: 

 

Brown   

 

- Phase, Live  

 

Blue    

 

- Neutral 

 

Green/Yellow   

- Earth

 

LIMITED WARRANTY 

 

Philips Selecon warrants its products against defects in materials or workmanship.  The term 
of this warranty is based on the product usage and is from the date of delivery.   

Usage 

– Entertainment, Theatre  

Term - Three Years 

Entertainment, Theatre relates to the typical conditions found in a theatre performance venue viz: 4 
– 6 hrs per day, six days per week. 

This  warranty  is  void  in  any  of  the  following  circumstances:    (a)  The  fixture  has  been  misused,  neglected, 
damaged or abused. (b) The fixture has been improperly installed, operated, repaired or maintained.  (c) The 
fixture  has  been  modified.    (d)  The  fixture  has  been  connected  to  other  equipment  with  which  it  is  not 
compatible.    (e)  The  fixture  has  been  used  or  stored  in  conditions  outside  its  electrical  or  environmental 
specifications.  (f) The fixture has been used for purposes other than for which it was designed.  (g) The fixture 
has been used outside its stated specifications and operating parameters. 
Correct installation of the luminaire is the owner’s responsibility. 

To  assert  a  warranty  claim,  complete  the  Philips  Selecon  Return  Authorisation  Form  (available  from  Philips 
Selecon).  Return the luminaire to Philips Selecon or its authorised agent. 

If  Philips  Selecon  accepts  the  warranty  claim,  Philips  Selecon  will  provide,  or  arrange  for,  service,  repair  or 
replacement  as  Philips  Selecon  shall  determine  in  its  sole  discretion.    Philips  Selecon  shall  bear  the  cost  of 
such service, repair or replacement.  However, the owner shall bear the cost of freight and insurance on the 
luminaire, both ways.  If Philips Selecon does not wish to service, repair or replace the defective luminaire, it 
shall refund the purchase price. 

Philips 

Selecon’s  sole  responsibility  is  to  repair,  replace  or  service  a  luminaire  subject  to  a  valid  warranty 

claim.    Under  no  circumstance  will  Philips  Selecon  be  liable  for  direct,  indirect,  incidental,  special  or 
consequential costs or damages, including dismantling and re-installation costs, loss of operations or profits, 
to the maximum extent permitted by law. 

Philips  Selecon  accepts  no  liability  for  personal  injury  or  property  damage  resulting  from  failure  to  heed 
relevant operating and safety procedures specified by Philips Selecon or imposed by law. 

This  is  an  express  warranty.    Philips  Selecon  disclaims  any  other  express  or  implied  warranties,  including 
warranties of merchantability or fitness for purpose, to the maximum extent permitted by law. 

Some jurisdictions do not allow limitations or disclaimers of implied or statutory warranties.  Some jurisdictions 
do  not  allow  disclaimers  or  exclusions  of  consequential  or  incidental  damages.    Therefore,  the  above 
disclaimers,  limitations  and  exclusions  may  not  apply  in  all  jurisdictions  in  which  Philips  Selecon  sells  its 
luminaires. 

This warranty gives the owner specific legal rights.  The owner may have other rights or remedies pursuant to 
the laws in its territory.  Nothing in this limited warranty should be construed as limiting or restricting any other 
statutory right or remedy of the owner, except for such limitations or restrictions herein as may be allowed by 
the law of the territory. 

Philips  Selecon  has  a  policy  of  continual  product  improvement  and  specifications  are  subject  to  change 
without notice. 

Summary of Contents for 5.5-13













Reviews: