Selecline 894749, User Manual, Page: 15 / 144

15
Fault Potential cause Solution
The lid does not close
properly.
There is too much frost
and ice.
Defrost the appliance.
The lid seal is not clean. Clean the lid seal.
The lid is hard to open. The lid seal is not clean. Clean the lid seal.
The temperature inside
the freezer is too high/
The temperature inside
the freezer is too low.
The temperature is not
properly regulated.
Select a lower
temperature.
The temperature inside
the freezer is too high.
The lid does not close
tightly or is not closed
properly.
Check that the lid closes
correctly and that the seal
is in good condition and
clean.
Before freezing, the
temperature inside the
appliance was not cold
enough.
Allow the appliance to
cool down while empty
for a sufficient period of
time.
Too many fresh products
have been put inside the
appliance.
Please wait for a few
hours and check the
temperature again.
Next time, put smaller
quantities of food into
the freezer at the same
time.
The food put into the
appliance was too hot.
Allow the food to
cool down to room
temperature before
storing them.
The temperature inside
the freezer is too high.
The products to be frozen
are placed too close to
one another.
Space out the products
so that air can circulate
between them.
The lid has been opened
too often.
Avoid opening the lid too
often.
The lid has been left open
for a long time.
Do not leave the lid open
for longer than necessary.
The temperature is not
properly regulated.
Select a higher
temperature.