Selecline 600081562, User Manual

Page: 14 / 139

REVERSING THE DOOR OPENING DIRECTION
Tools Required: Philips screwdriver, flat-bladed screwdriver, hexagonal spanner,
adjustable wrench.
Notes:
Ŷ
Ensure the appliance is unplugged and empty.
Ŷ
To remove the door, it is necessary to tip the appliance backwards. Rest the unit
on something solid so that it will not slip during the door reversal process.
Ŷ
All parts removed must be saved as they are required to reinstall the door.
Ŷ
Do not lay the appliance flat as this may damage the coolant system.
Ŷ
This is a 2-person task as it will take more than 1 person to handle the appliance
during assembly.
1. Remove the two screws from the rear side of the top cover. See Figure 3.
2. Remove the top cover and put it aside. Place it on a soft surface where it will not
be scratched. See Figure 4.
3. Unscrew the top hinge and remove the door. Place the door on a soft surface
where it will not be scratched. See Figure 5.
4. Unscrew the bottom hinge. Remove the adjustable levelling feet from both
sides. See Figure 6.
5. Remove the bottom hinge pin, turn the bracket over, and replace it. See Figure
7.
6. Refit the bracket on the bottom hinge. Replace both the adjustable levelling
feet. See Figure 8.
7. Replace the door. Ensure the door is aligned both horizontally and vertically.
This ensures the seals are closed on all sides before you tighten the top hinge.
See Figure 9.
8. Replace the top cover and tighten the two screws on the back. See Figure 10.
9. Detach the refrigerator door gasket, rotate it, and reattach it. See Figure 11.
5/ USE
FIRST USE
Cleaning the Interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and a neutral soap. Dry thoroughly. This will clear
the typical smell of a brand-new product.
Important! Do not use detergents or abrasive powders as these will damage the
finish.
Temperature Setting
Ŷ
Plug in your appliance. The internal temperature is controlled by a thermostat.
There are eight settings available (see Figure 12). 1 is the warmest temperature
and 7 is the coldest temperature setting. When set at 0, the appliance is turned
off. When set at 7, the compressor does not stop.
Ŷ
The appliance may not operate at the correct temperature if it is in a particularly
hot location or if you open the door frequently.
Ŷ
This refrigerating appliance is not suitable for freezing foodstuffs.
13