Selecline 600081562, User Manual

Page: 13 / 139

Space Requirement
Ŷ
Keep enough space for the door to open. See Figure 1.
I MPORTANT! Ensure that there is adequate air circulation around the appliance. A
lack of air circulation leads to overheating.
Levelling the Appliance
Ŷ
Level the unit using the two front feet which adjust for height.
Note: If the unit is not level, the doors and the magnetic seal alignment will not be
covered correctly.
Positioning
Install the appliance in a location with an ambient temperature corresponding to
the climate class indicated on the rating plate of the appliance.
For refrigerating appliances with climate class:
Ŷ
Extended temperate: This refrigerating appliance is intended to be used at
ambient temperatures ranging from 10° C to 32° C (SN).
Ŷ
Temperate: This refrigerating appliance is intended to be used at ambient
temperatures ranging from 16° C to 32° C (N).
Ŷ
Subtropical: This refrigerating appliance is intended to be used at ambient
temperatures ranging from 16° C to 38° C (ST).
Ŷ
Tropical: This refrigerating appliance is intended to be used at ambient
temperatures ranging from 16° C to 43° C (T).
Location
Ŷ
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight, and so on. Ensure that air can circulate freely
around the back of the appliance cabinet. To ensure the best performance, the
minimum distance between the top of the appliance and any overhanging wall
unit is at least 50 mm. Ideally, the appliance should not be positioned below any
overhanging wall units.
Ŷ
Accurate levelling is ensured by one or more adjustable feet at the base of the
appliance cabinet.
Ŷ
This refrigerating appliance is not intended to be used as a built-in appliance.
Warning! It must be possible to disconnect the appliance from the mains power
supply; the electrical plug must, therefore, be easily accessible after installation.
Electrical Connection
Ŷ
Before plugging the appliance in, ensure that the voltage and frequency
shown on the rating plate corresponds with your domestic power supply. The
appliance must be grounded/earthed. The power supply cable plug is provided
with a contact for this purpose. If the domestic power supply socket is not
grounded, connect the appliance to a separate earth in compliance with current
regulations. Consult a qualified electrician.
Ŷ
The manufacturer declines all responsibility if the above safety precautions are
not observed.
Ŷ
This appliance complies with the E.E.C. Directives.
12