7
2 Assembly preparations
2.1. Tools
2.2 Mast attachment
Before starting with the assembly, make sure you have the following tools available:
• Hack saw
• Torx bits and bit holder
: T25; T30, T45
• Measuring tape
• Knife
• Hammer
• Pencil
If Sta-lok is to be fitted you will also need:
• Small slotted screw driver
• Two adjustable spanners
• Pair of pliers
• Tape
• File
• Locking adhesive (included in the eye fitting pack)
Always make sure that the forestay can articulate in all directions in the top. Toggles must be used in most
cases to ensure sufficient articulation.
Fig. 2.2.a
Fig. 2.2.b
Fig. 2.2.c
Tools needed for making the hole in deck:
• Template (1:1) (included in kit)
• Hole saw (see table) or jig saw
• Drill bit (see table)
Furlex model Hole saw
Ø
Drill bit
Ø
404TD
152
8,5
