21
8 WF104 GENERAL PRECAUTIONS
The mobile units are powered exclusively at low voltage 42 Vac,
in compliance with strict international regulations.
You are nevertheless advised to observe the elementary precau-
tions illustrated in detail in the power source operating manual.
Before carrying out any work, replacement or
repair of parts, ensure that the power source is
disconnected from the power supply line.
8.1 Front control panels
Fig. 7
* T1:
Permits bleeding of the air in the gas circuit pipes.
* T2:
Permits manual wire feed (useful for passing the wire
along the torch sheath during preparation operations).
Fig. 8
* A5 water fitting:
it must be connected to the MIG torch
delivery pipe (generally blue), if the latter is water-cooled.
* A6 water fitting:
it must be connected to the MIG torch
return pipe (generally red), if the latter is water-cooled.
* Connector J2:
present on the trolley only as an optional (see
accessory kit). Any Push-Pull torch connector must be con-
nected to it; this torch is provided with wire tensioning motor,
and is particularly useful for welding aluminium.
* J1: remote control connector.
8.2 Rear control panel
Fig. 9
* Socket D2:
the power cable of the cable bundle coming from
the power source must be connected to this socket.
* Conector J3:
the 5+2-pole connector of the cable bundle com-
ing from the power source must be connected to this connector.
* A3 water fitting:
the pipe bundle delivery pipe must be con-
nected (blue).
* A4 water fitting:
the pipe bundle return pipe must be con-
nected (red).
* A1: Gas fitting.
8.3 Technical specifications
WF104
Diameter of wire workable
0.8-1.0/1.2-1.6
0.8-1.0/1.2-1.6 aluminium
1.0-1.2-1.4-1.6 cored
Speed of wire feed
1-22 m/min.
Power of geared motor
120W
Wire feed button
yes
Gas discharge button
yes
Remote control
optional
Connector for Push-Pull torch
optional
Steel rollers
yes
Teflon rollers
yes
Protection rating
IP23S
Insulation class
H
Weight 18
Kg.
Dimensions (HxWxD)
435x220x600 mm
Data at 40°C ambient temperature
Summary of Contents for Genesis 282-352-503 PME
Page 143: ...143 ...
Page 144: ......
