Selco Genesis 1700 BLH, Instruction Manual

Page: 34 / 208

34
8 TECHNICAL SPECIFICATIONS
GENESIS 1700 TLH GENESIS 1700 BLH
Power supply voltage U1 (50/60Hz) 1x230V ±15% 1x230/115V ±15%
Zmax (@PCC) 6m Ω
*
6m Ω
*
Slow blow line fuse 16A 16/30A
Maximum input power (kVA) 8.5 kVA 8.5/5.3 kVA
Maximum input power (kW) 5.9 kW 5.9/3.7 kW
Power factor PF 0.70 0.70
Efficiency (µ) 81% 81%
Cos
ϕ 0.99 0.99
Max. input current I1max 36.8A 36.8/46.5A
Effective current I1eff 21.8A 21.8/27.5A
MMA welding current (40°C)
(x=25%) - - / 120A
(x=35%) 170A 170A/ -
(x=60%) 150A 150/95A
(x=100%) 120A 120/75A
MMA welding current (25°C)
(x=100%) 150A 150A/ -
TIG welding current (40°C)
(x=25%) - - / 150A
(x=45%) 170A 170A/ -
(x=60%) 160A 160/120A
(x=100%) 140A 140/100A
TIG welding current (25°C)
(x=100%) 160A 160A/ -
Adjustment range I2 3-170A 3-170A/3-150A
Open circuit voltage Uo 80Vdc (MMA) /106Vdc (TIG) 80Vdc (MMA) /106Vdc (TIG)
Peak voltage Vp 9.4kV 9.4kV
IP Protection rating IP23S IP23S
Insulation class H H
Manufacturing Standards EN 60974-1/ EN 60974-3 / EN 60974-10 EN 60974-1/ EN 60974-3 / EN 60974-10
Dimensions (lxdxh) 410x150x330 mm 410x150x330 mm
Weight 8.4 kg. 8.4 kg.
Power supply cable 3x2.5 mm2 3x2.5 mm2
Length of power supply cable 2m 2m
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.