4
1.30 Spare parts
Assemblies or components may only be replaced with identical spare parts.
1.40 Transportation/storage
Any damage discovered after delivery must be reported immediately to the transport company. If
necessary, take suitable measures to prevent the device from being put into operation. The device may
only be stored in a dry, dust-free environment at a temperature between 0 and 60 degrees.
1.50 Electrical connection
Electrical tasks may only be carried out once:
The electrical system has been disconnected from the voltage supply and prevented from being
switched on again accidentally
The absence of voltage has been checked
You have make sure that additional monitoring and protective devices for the control system are
correctly installed.
Observe all applicable rules and regulations during connecting.
1.51 Beer connection
The beer connection is connected via an adapter with a 5/8" thread on the underside of the device.
1.52 Operation
Should the device deviate in any way from its normal operation, always take it out of operation if in doubt
and mark it suitably in order to prevent it from being started up again by a third party. Also notify the
customer service department.
1.60 Service
All service instructions contained in the manual concerning servicing work must be observed without fail.
2.00 Proper use
Selbach beverage chillers and beverage pumps are designed for dispensing chilled drinks. These appliances
are utilised in, among other things, catering and for recreational purposes.
Selbach beverage chillers are licensed only for the above-mentioned field of application and therefore
unsuitable for cooling down hot liquids, chemicals or the like.