-
67
-
■
Feed test 2
This test reads the check sheets included in the package to test if the device reads them
properly.
Even if the device doesn’t read something properly, the test will continue.
Once reading of the check sheets starts, the test will continue until an error other than a
reading occurs or the hopper is empty.
1.
Press the
MENU
switch to enter the menu mode.
2.
Use the
UP
and
DOWN
switches to select the following parameters,
and press the
FEED/ENTER
switch.
3.
Use the
UP
and
DOWN
switches to select [Feed Test 2].
4.
Press the
FEED/ENTER
switch to confirm the selection and display [Feed Test 2].
(“
*
” mark flashes in the first column of the first line on the LCD.)
5.
Use the
UP
and
DOWN
switches to select the setting value.
6.
Press the
FEED/ENTER
switch to start/stop feed test 2.
(The flashing “
*
” mark disappears from the LCD, and the test will start/stop.)
7.
Keep pressing the
CLEAR/EXIT
switch until it returns to normal mode,
or press the
MENU
switch to return to normal mode.
Note)
• You cannot return to normal mode while the test is running.
• If a reading error occurs on both sides of a sheet, the error count will
be two.
Feed test 2 setting values
• Stop
• Start
Operating tests
■
Feed test 2
