Sekonic SR-6500, Operating Manual

Page: 102 / 118

- 101 -
Error displays and countermeasures
(3) Operation errors
Error Explanation Code Procedures for Resolving and Clearing Errors
Hopper stops
Interlock on the side of the
paper-feeding roller operated.
R1
• Release the interlock switch.
• Press the CLEAR switch
(or execute the clear error command).
Drawing out error
Sheet was pulled out after it
was fed.
R2
• Place sheets back on the hopper.
• Press the CLEAR switch
(or execute the clear error command).
Timing mark error
Only three or fewer timing
marks were detected on the
front side of the read sheet.
R4
• Check the orientation of the
sheets.
• Check the specifications of the
sheets.
• Press the CLEAR switch
(or execute the clear error command).
Only three or fewer timing
marks were detected on the
back side of the read sheet.
Setting error
When reading front side marks
using a timing control type, the
next timing mark is detected
within the area set by the
control multiple number.
R5
• Set a reading type and a control
multiple number according to
specifications of the sheets.
• Check the specifications of the
sheets.
• Press the CLEAR switch
(or execute the clear error command).
When reading back side marks
using a timing control type, the
next timing mark is detected
within the area set by the
control multiple number.
Overflow of the Image
memory
Out of specification(long length)
sheet fed in the device.
R6
• Press CLEAR switch
• Send error clear command
Black level error
There is light colored stain on
the front side reading unit.
S2
• Check the reader unit for dirt
and other contamination and
clean as necessary.
• Press the CLEAR switch
(or execute the clear error command).
There is light colored stain on
the back side reading unit.
Reading start detection
sensor stain error
There is stain on reading start
detection sensor.
S3
• After cleaning the sensor, turn
the power back on.