0000137188 Rev. 1.0
5
O. Temperature sensor
4. TECHNICAL SPECIFICATIONS
Power supply:
10
0÷240 Vac 50/60 Hz 30 watt
Switch:
on side of box
Inlet measurements:
pH, through BNC
o
pH scale: 0÷14.0 pH
o
pH precision: +/-0.1 pH
Temperature Scale:
0÷100 °C (PT100 sensor)
Pump flow rate
with transaxle technology:
o
pH:
1.5 l/h (hose 6X10) 1.5 bar
o
H
2
O
2
:
0.4 l/h (hose 3X7), 1.5 l/h (hose 6X10) 1.5 bar
Pump relay pH:
10 A 250 V (dry contact)
Relay for alarm:
10 A 250 V (dry contact)
Relay for H
2
O
2
:
10 A 250 V (dry contact)
Dedicated power for pumps:
240 Vac 10 watt
Input signal:
100÷240 Vac
Level probe:
pH, H
2
O
2
Install the
Pool Basic Pro EVO
control device on a hard support (vertical wall) where it
can be easily accessed by the operator. Attach the
Pool Basic Pro EVO
control device
using the provided fixing bracket (distance between centre of holes:
95mm. Hole Ø 6).
Before carrying out any operation inside the equipment, make sure that the switches are
on 0. Unscrew the two screws on the upper part of the equipment by a quarter of a turn
and the front side will fold down on the hinges.
