manualshive.com logo in svg

Sejoy UA-105, Owner'S Booklet

Share
Download
Sejoy UA-105 Owner'S Booklet Download Page 32

Maintenance

Replacing the battery  

Your meter comes with two preinstalled, 1.5 volt, type AAA, alkaline 
battery. The battery provides enough power for the meter to perform 
about 1000 tests. If your battery runs low, the battery symbol               
appears on every display screen until you change the battery. 

Important: When this symbol appears, you should replace the battery 
immediately.

① 

With the meter off, open the battery cover.

② 

Remove the old batteries and place the new 

ones in the battery compartment.

③ 

Put the battery cover back into position until it 

locks into place.

④ 

Check your meter settings

Replacing the battery does not affect your stored 

results. However, you may need to re-set your  

meter settings. See Setting Up Your Meter section.

Note: Batteries need to be properly disposed of. Contact 
your local government for disposal or recycling practices
in your area.

 “

”

 30

Summary of Contents for UA-105

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands