manualshive.com logo in svg

Sejoy UA-105, Owner'S Booklet

Share
Download
Sejoy UA-105 Owner'S Booklet Download Page 20

Testing

 

your

 

uric acid

Testing

Note: If you do not start the test within three minutes, the 
meter will turn off. To restart your meter, take out the 
unused test strip and reinsert it into the meter.

Important:

 The meter should only be used with US-101

test strips. Using other test strips with this meter can 
produce inaccurate results. 

② 

System check screen

Each time the meter powers on, this screen briefly 
appears so that you can make sure the display is 
working properly.

Note: 

•

If      appears, it indicates the operating temperature is 

over range. Place the system in operating temperature 
room for half hour. Then test again. 

•

If             appears, it indicates the battery is almost out 

of power. Replace the battery now. 

③ 

The blood drop symbol flashes on the display screen. 

Your meter is now ready to apply blood sample.

18

① 

With meter off or in setting mode and memory mode, 

       insert a test strip to enter into testing mode.

o

Summary of Contents for UA-105

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands