Control
solution
testing
When to perform a control test
Control Solution contains a known amount of uric acid and is used to
check that the meter and the test strips are working properly.
Do a control solution test:
• Whenever you open a new vial of test strips.
• Whenever you want to check if you are testing correctly
• If you suspect the meter and test strips are not working properly.
• If you have had repeated unexpected
results.
uric acid
• If you drop or damage the meter.
• If you left the test strip container open or you think the test strips
have been damaged
• If the test strips were stored in extreme temperatures and/or humidity
• Your test result does not match how you feel
NOTE:
• Only use the Sejoy CS-301 control solution.
• Close the control solution bottle tightly after use
• Write the date you open the control solution bottle on the bottle label.
The control solution must be discarded 3 months from the date the
first open date or the expire date on the vial label, whichever comes
first.
• Do not use control solution that is past the Exp. Date or discard date.
• Refer to the control solution label for control solution storage
conditions.
• The control solution can stain fabric. Remove stains by washing with
soap and water.
CAUTION: Do Not swallow control solution. It is not for human
consumption. Do Not apply control solution to the skin or eyes
as it may cause irritation.
25
Summary of Contents for UA-105
Page 1: ...Owner s Booklet UA 105 Monitoring System Uric Acid ...
Page 2: ......
