manualshive.com logo in svg

Sejoy BG-211b, Owner'S Booklet

Share
Download
Sejoy BG-211b Owner'S Booklet Download Page 51

 48

FCC INFORMATION

Caution: Changes or modifications to this unit not expressly 
approved by the party responsible for compliance could void the 
user authority to operate the equipment. This device complies 
with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including 
interference that may cause undesired operation.
*Note:
The device has been evaluated to meet general RF exposure 
requirement.The device can be used in portable exposure 
condition without restriction. 
This equipment has been tested and found to comply with the 
limits for a Class B digital device,pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radiofrequency 
energy. If this equipment does cause harmful interference to 
radio or television reception,which can be determined by turning 
the equipment off and on, the user is encouraged to try and 
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from 
   that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for 
   help.

Summary of Contents for BG-211b






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands