LagBuster is easily installed in your network between the modem and router
(See Figures 2 and 3)
.
TYPICAL NETWORK
Ethernet Cable Connected to
WAN Port
Figure 2
Router
Modem
YOUR NETWORK WITH LAGBUSTER INSTALLED
Ethernet Cable Connected to
WAN Port
Router
Modem
Figure 3
LagBuster
Note
:
Additional steps are necessary when connecting the LagBuster to
a network using a
combination modem/router
. See
http://www.sejent.com/combounit
for instructions.
Connection Instructions:
1-
Place your LagBuster in a
well-ventilate
d
,
moisture-free
and
dust-free
environment.
2-
Power off your router and Internet modem
.
If you have more than
one router installed in your network, power off the router that is
directly connected to the modem.
3-
Locate the
Wide Area Network (WAN) Ethernet port
on your router
(See Figure 4)
.
The LagBuster MUST be connected
to the WAN port
Back of a typical router
Figure 4
Note: The WAN port is usually labeled as “
WAN
,” or “
Internet
,” or “
To
Modem
,” or with a
Circle
. It is also usually separated from the other
Ethernet ports on the router.
Connecting Your LagBuster
Connecting Your LagBuster
Page 4
Page 5
