Use a 5mm hex and a 13mm socket wrench to loosely
fasten two M8x16mm button head bolts and two M8
Nylon Lock Nuts for each Hinge Half, Upper on each
side of the vehicle. Driver side shown
Line up the holes in each side of the top hinges and
insert the M8x50 button head bolt first through the
Rod End and then through the Hinge Half, Lower Use
the M8 Nylon Lock Nuts to secure the bolt. Mirror and
repeat on other side. Tighten both sides. The
windshield can be horizontally aligned by tightening or
loosening these bolts on each side
Shown above is both assembled Hinge Halves, Upper
and their orientations on the frame of the vehicle.
Taking care to keep the Center Retainer under the
header panel, place the windshield on the frame of
the vehicle.
21
22
23
24
9
