Seiko SSE093J1 Complete User Manual Download

Page: 53 / 56

ASTRON 8X22 GPS SOLAR

TROUBLESHOOTING

At trouble

Possible causes

Solutions

Reference

pages

Indicator hand

misalignment

The position of the hand
showing the reception
way, charging status, in-
flight mode ( ), and DST

is misaligned

The automatic leap second reception

function has been activated.
(The indicator hand displays as shown at
the right.)

It takes up to 18 minutes to complete the leap second reception.
Use the watch with reference to the “Place where GPS signals can be easily
received

P. 16

.”

P. 27

The preliminary position of the indicator hand is
misaligned.
This occurs when the preliminary position of the
indicator hand is misaligned due to external factors.

Adjust the preliminary position of the indicator hand to the

correct position.

P. 43 ~ 45

Operation

The crown or buttons
cannot be operated.

The stored electric power is running short.

Sufficiently charge the watch until it starts moving at 1-small second intervals.

P. 14

Date is moving right after a setting is carried out by the
crown or button operation.

Wait without doing anything.
After the date stops, the crown and buttons can be operated.

—

You get lost in the middle
of the operation.

—

When the crown is pulled out

①

Push the crown back in.

②

The second hand will start to move within 6 minutes.

③

After that, restart operation.

—

When the crown is not pulled out

①

Press Button B.

②

The second hand will start to move within 2 minutes.

③

After that, restart operation.

—

Other

trouble

Blur on the dial glass
persists.

Small amount of water has got inside the watch due to
deterioration of the gasket, etc.

Contact the retailer from whom the watch was purchased.

—

Summary of Contents for SSE093J1

























































Search results

Summary of Contents for SSE093J1

Reviews:

Related manuals for SSE093J1

Brands by name

Popular brands

Seiko SSE093J1, Complete User Manual

Search results

Summary of Contents for SSE093J1

Reviews:

Related manuals for SSE093J1

Brands by name

Popular brands