Seiko SSE093J1 Complete User Manual Download

Page: 51 / 56

ASTRON 8X22 GPS SOLAR

TROUBLESHOOTING

At trouble

Possible causes

Solutions

Reference

pages

Misalignment

of time and

hands

The position of the second
hand showing “reception
result” and “number of
acquired satellites from
which GPS signals are
received” is misaligned.

The preliminary position of the second hand is
misaligned. (This occurs when the position of the
second hand is misaligned due to external factors.)



Preliminary position

P. 43

①

The automatic hand position alignment function is activated to automatically

adjust the position. Please use the watch as it is. The automatic hand
position alignment function is activated once a minute for the second hand.

②

When misalignment of the hand is not adjusted even with operation of

②

consult the retailer from whom the watch was purchased.

P. 42

The watch temporarily
gains or loses time.

The automatic time adjustment function has not been
activated for a few days.

If the energy stored in the watch is insufficient, the automatic time adjustment
function may be activated once in 3 days.
To adjust the time immediately, carry out “manual time adjustment.”

P. 25

P. 24

The watch received an incorrect time due to external
factors (erroneous reception).

①

Receive GPS signals in a place where GPS signals can be more easily

received.

②

Adjust the time zone as necessary.

P. 16
P. 18

The watch is left in an extremely high or low
temperature place for a long time.

①

If the watch is returned to a normal temperature place, the accuracy will be

recovered.

②

If the time is incorrect after that, manually adjust the time as necessary.

③

If the watch is not recovered, consult the retailer from whom the watch was

purchased.

P. 24

The time is gained (lost)
1 hour

DST (Daylight Saving Time) is ON (or OFF).

Check DST (Daylight Saving Time) setting.

P. 20

Summary of Contents for SSE093J1

























































Search results

Summary of Contents for SSE093J1

Reviews:

Related manuals for SSE093J1

Brands by name

Popular brands

Seiko SSE093J1, Complete User Manual

Search results

Summary of Contents for SSE093J1

Reviews:

Related manuals for SSE093J1

Brands by name

Popular brands