The Shield
Haig
Timepiece
(SH0501 – SH0508)
Setting Instructions
1)
Unscrew the crown by rotating it counterclockwise until it is free from the case threads.
2)
Pull the crown out two clicks to its outermost position.
3)
Rotate the crown clockwise until the date indicator advances one position.
4)
Set the current time as follows:
-
for AM hours advance the hands directly to the current time,
-
for PM hours advance the hour hand one full rotation (12 hours)
once
, prior to setting the time.
5)
Push the crown in one click to its middle position.
6)
Set the current date by rotating the crown clockwise until the correct value is displayed.
7)
Push the crown in to its innermost rest position to commence timekeeping.
8)
Secure the crown to the case by pressing in on the crown and carefully starting the threads by rotating the
crown clockwise. Screw the crown down until it is fully seated –
finger tighten only
.
Note:
Setting the time to AM / PM accordingly ensures that the date indicator changes at midnight rather than
noon. If the date indicator is changing in the afternoon advance the hour hand one full rotation (12 hours),
then adjust the date indicator as necessary.
Tachymeter Buttons
The tachymeter buttons feature threaded collars that lock the buttons in place to prevent incidental
activation, and to provide additional resistance to water penetration. To use the buttons they must be
unlocked first.
1)
To unlock the buttons, unscrew the collar by rotating it counterclockwise until it is flush with the underside
of the button.
2)
To lock the buttons, screw the collar down by rotating it clockwise until it is secured to the case.
