④Keep button
○
C
pressed for 1 second,
and then release it as "Print" stops
flashing and remains displayed.
The data in the selected block is
displayed quickly one after another,
and then printout is started.
(While the data in the block is
displayed quickly one after another,
the stopwatch checks for the fastest
lap time in the selected block.)
)
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
The total elapsed time of
the block is displayed.
●To print out the data in all the blocks in memory
①Connect the stopwatch and printer, and turn on the
power switch of the printer.
②Show the memory recall display, and keep button
○
C
pressed.
Flashing "Print" is displayed.
③Keep button
○
C
pressed further until "Print All" is
displayed.
④Then, release button
○
C
. The data in all the blocks is displayed
quickly one after another starting from block "1", and will be printed
out at a stretch.
(While the data is displayed quickly one after another, the stopwatch
checks for the fastest lap time in each block.)
Notes:
※While the printout is under way, none of the stopwatch buttons will work.
・Once started, the printout cannot be canceled halfway.
・While the data is displayed quickly before printout or while the data is printed
out, do not turn off the power switch of the printer or disconnect the
stopwatch from the printer. Otherwise, a malfunction will result.
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
Button
○
Ｃ
(Printout display for the data in all the blocks)
⑥Printout of split time and lap time
●With the print mode selection switch of the printer printout can be selected from
'both split time and lap time' and 'lap time only'.
※The ranking or section No. is printed out from "1" to "99". After "99" they return to "0"
and start again from "1".
BLOCK：１
Year・Month・Date 1999 10 10
Start time START 10:19
Split time SPLIT
１ Time 1 - 0:05' 03 76
２ 〃 2 - 0:05' 12 33
３ 〃 3 - 0:05' 41 13
４ 〃 4 - 0:05' 59 06
５ 〃 5 - 0:06' 17 88
６ 〃 6 - 0:06' 43 56
７ 〃 7 - 0:07' 21 47
８ 〃 8 - 0:07' 36 48
Finish time /S/0:08' 02 58
(Ex. 1,500m race)
Printout by the printer
Printer switch
LAP
SPLIT
SPLIT
LAP
SPLIT
SPLIT
Split time
Split time + Lap time
ID：１
BLOCK：１
Year・Month・Date 1999 10 10
Start time START 10:19
Split time + Lap time SPLIT/LAP
SPLIT 1 - 0:18' 05 33
LAP 0:18' 05 33
SPLIT 2 - 0:36' 37 78
LAP 0:18' 32 45
〃 3 - 0:55' 13 11
0:18' 35 33
〃 4 - 1:13' 25 34
0:18' 12 23
〃 5 - 1:31' 57 55
0:18' 32 21
〃 6 - 1:49' 32 78
0:17' 35 23
〃 7 - 2:07' 31 04
0:17' 58 26
〃 8 - 2:25' 43 62
0:18' 12 58
Finish time /S/2:34' 02 77
(Ex. Marathon)
１
｛
２
｛
３
｛
４
｛
７
｛
６
｛
５
｛
８
｛
⑦Printoutof of lapse of time.
While the stopwatch is set in the time mode, the time when the stopwatch button is pressed to measure
the split time can be printed out.
①Reset the stopwatch.
②Show the time/calendar mode.
③Measure a lap time in the same manner as you do in the stopwatch mode.
※The time a lap time is measured is not stored in memory
SPLIT
ID
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
ID
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
SPLIT
ID
RECALL
BLOCK
LAP
STOP
BATT.
LAP
F
E
(Start)
Each press
of button
○
Ｂ
(Stop)
Year・Month・Date 1999 10 10
Start time ST-10：10' 00
１− 1-10：10' 21
２− 2-10：10' 25
３− 3-10：10' 28
４− 4-10：10' 31
５− 5-10：10' 33
６− 6-10：10' 36
７− 7-10：10' 39
８− 8-10：10' 50
９− 9-10：10' 59
10−10-10：11' 03
Finish time /S/10：11' 06
○
B
○
A
○
A
ID：20
Time
（1）When the power switch of the printer is turned on during the measurement, the
data measured thereafter will be printed out.
（2）While the printer is printing out, do not pull out the roll paper or do not pull it
back. Also, do not operate the stopwatch without installing the roll paper on the
printer, as this will cause a malfunction of the printer.
（3）When the printer is not used, be sure to turn the power switch of the printer
"OFF".
（4）After use, slide the power switch of SP12 to "OFF", and then pull out the
connecting cord, holding it with fingers at the portion shown in the illustration of
''
■
4
④How to connect the printer to the stopwatch''.
■
5
PRECAUTIONS ① Remarks on using printer
（1）When the printer is not used, be sure to put the cap on the jack of stopwatch.
②Remarks on using stopwatch
